Шаши
 Posted August 16, 2010 Share Posted August 16, 2010 Last levels calibration results for RBA gripper Hard Spring 8-9 = 97.2 kg 9-9 = 103.9 kg 9-10= 109.4 kg 10-10 = 114.3 kg 1 Quote Link to comment Share on other sites More sharing options...
Malice Posted August 21, 2010 Share Posted August 21, 2010 Calibrated by me: 3.5-174 lbs. Extended handle BBE-178 lbs. The sweep on my 3.5 is still tougher than the sweep on my BBE even though the final close was lighter on the rgc. Quote Link to comment Share on other sites More sharing options...
Malice Posted August 21, 2010 Share Posted August 21, 2010 That is a beautiful strap you're using I just have a plain blue one and now it's boring after seeing yours Quote Link to comment Share on other sites More sharing options...
Malice Posted August 22, 2010 Share Posted August 22, 2010 Calibrated by me: BBSM-129 lbs. FBBC old schools: 2X-90 lbs. 3X-129 lbs. 4X-157 lbs. I have a 5X as well but left it at work and I'll try to calibrate it when I get a chance. I don't have a single X but might end up buying one just to complete the set. Quote Link to comment Share on other sites More sharing options...
Cannon Posted August 29, 2010 Share Posted August 29, 2010 I reopened this thread because I would like to see RGC numbers continued to be reported here. Please understand this thread is for reporting calibrations and who did them. Discussions about the process, etc, can be hashed out in separate threads. Quote Link to comment Share on other sites More sharing options...
Bigdeze Posted August 30, 2010 Share Posted August 30, 2010 Glad to see this thread opened back up. Quote Link to comment Share on other sites More sharing options...
Malice Posted August 30, 2010 Share Posted August 30, 2010 Calibrated by me: MM1 replica-162 lbs. #4-217 lbs. Quote Link to comment Share on other sites More sharing options...
Sher Posted August 30, 2010 Share Posted August 30, 2010 Glad to see this thread opened back up. Ditto. To stay on topic, Milfeld cal'd two for me: RB130 - 80lbs, HG200 - 81lbs. (Ben, I searched the topic in case I'd already posted these but I didn't find one.) Quote Link to comment Share on other sites More sharing options...
Benedikt Farsmann Posted August 30, 2010 Share Posted August 30, 2010 Thanks for reopening, Matt! Sherrie, I will go trough the list and see if it is already listed. An update is coming soon. Quote Link to comment Share on other sites More sharing options...
Kashtan Posted September 7, 2010 Share Posted September 7, 2010 Warren Tetting T2 - 32,25 kg=71 lbs. T6 - 66,38 kg=146 lbs. T9 - 104 kg =229 lbs. Continue to be T14. Searching cargo for Beast... Quote Link to comment Share on other sites More sharing options...
Force Posted September 18, 2010 Share Posted September 18, 2010 Thanks again guys, List updated! complete chart rankings only version - for slower connections: rankings only I found some mistakes in the list. In Matti's Calibration list if there is a number after Beef Builder gripper it means that it doesn't have a regular 1/16" mount. 1 = 1/4" 2 = 3/16" 3 = 1/8" 4 = 1/16" (standard) Example BBE1 / 68,5 kg / 151,21 lbs / rating = 3,02. Elite with a 1/4" mount. You have put them all together and that affects a tiny bit to average value. Quote Link to comment Share on other sites More sharing options...
Benedikt Farsmann Posted September 22, 2010 Share Posted September 22, 2010 Thanks again, List updated! complete chart rankings only version - for slower connections: rankings only Quote Link to comment Share on other sites More sharing options...
Malice Posted October 1, 2010 Share Posted October 1, 2010 Calibrated today by me: T-63 lbs. #2-107 lbs. BBSE-195 lbs. Quote Link to comment Share on other sites More sharing options...
Cannon Posted October 3, 2010 Share Posted October 3, 2010 Calibrated by Matt Cannon: BBSM: 129.21 #3: 145.36 BBGM: 147.89 SS#3: 153.04 BBE: 174.59 #3.5: 179.74 Thank you very much Matt. No problem. To clarify, the SS#3 is a "single stamped #3." Quote Link to comment Share on other sites More sharing options...
Malice Posted October 3, 2010 Share Posted October 3, 2010 No problem. To clarify, the SS#3 is a "single stamped #3." Ah, makes sense now. I was thinking it stood for stainless steel #3 or something Quote Link to comment Share on other sites More sharing options...
Cannon Posted October 3, 2010 Share Posted October 3, 2010 No problem. To clarify, the SS#3 is a "single stamped #3." Ah, makes sense now. I was thinking it stood for stainless steel #3 or something Exactly what I didn't want people thinking Quote Link to comment Share on other sites More sharing options...
Carlos F. Rivera Pagan Posted October 4, 2010 Share Posted October 4, 2010 Calibrated by Matt Cannon; Single stamped Stainlees Steel handle #3 = 158.24 #3.5 = 174.60 #3.5 = 178.16 BBE = 179.56 RB330 = 179.56 RB300 = 192.39 BBSE = 200.86 #4 = 211.24 That "Old Style" #3 has a very wide spread compare with the new #3's, and by so it "feels" a lot harder than a average #3 The RB300 definetly is a very rare specimen. Quote Link to comment Share on other sites More sharing options...
kilkkinen Posted October 10, 2010 Share Posted October 10, 2010 Calibrated by Me - Tanu #3 / 68kg / 150.11lbs / rating = 3.00 - Tanu BBE / 75kg / 165.5kg / rating = 3.26 Quote Link to comment Share on other sites More sharing options...
Шаши
 Posted October 15, 2010 Share Posted October 15, 2010 (edited) Calibrated by me: JBD = 83.3kg, 37.5kg ( owner recruit ) Edited October 15, 2010 by Draught-Player Quote Link to comment Share on other sites More sharing options...
Force Posted October 20, 2010 Share Posted October 20, 2010 (edited) RB330 = 179.56 RB300 = 192.39 The RB300 definetly is a very rare specimen. That is ridiculous. Gripper that should be way harder is 13 lbs looser. All over the map. That RB300 is almost 20 lbs heavier than average RB300 and that 330 is 20 lbs looser than average. Edited October 20, 2010 by Force Quote Link to comment Share on other sites More sharing options...
Cannon Posted October 20, 2010 Share Posted October 20, 2010 RB330 = 179.56 RB300 = 192.39 The RB300 definetly is a very rare specimen. That is ridiculous. Gripper that should be way harder is 13 lbs looser. All over the map. That RB300 is almost 20 lbs heavier than average RB300 and that 330 is 20 lbs looser than average. Part of why I don't like RBs very much That RB300 was an absolute brick. If a gripper does not come out as average, I squeeze it against other grippers of similar rating to double check. That thing is every bit of 192lbs. Maybe could benefit from oiling or something. But a weird gripper for sure. Quote Link to comment Share on other sites More sharing options...
Hubgeezer Posted October 20, 2010 Share Posted October 20, 2010 Years ago, Dale Harder (Oldtimer on the board) said he had a RB300 that no one could close, and that included Clay Edgin, with a fairly deep set. I think, in theory, a RB300 should be roughly the same as a 3.5. Quote Link to comment Share on other sites More sharing options...
Reznor Posted October 20, 2010 Share Posted October 20, 2010 Calibrated by Matt Cannon; Single stamped Stainlees Steel handle #3 = 158.24 #3.5 = 174.60 #3.5 = 178.16 BBE = 179.56 RB330 = 179.56 RB300 = 192.39 BBSE = 200.86 #4 = 211.24 That "Old Style" #3 has a very wide spread compare with the new #3's, and by so it "feels" a lot harder than a average #3 The RB300 definetly is a very rare specimen. I have never heard of a single stamped, stainless gripper. Could you please provide a picture? Quote Link to comment Share on other sites More sharing options...
Cannon Posted October 21, 2010 Share Posted October 21, 2010 Calibrated by Matt Cannon; Single stamped Stainlees Steel handle #3 = 158.24 #3.5 = 174.60 #3.5 = 178.16 BBE = 179.56 RB330 = 179.56 RB300 = 192.39 BBSE = 200.86 #4 = 211.24 That "Old Style" #3 has a very wide spread compare with the new #3's, and by so it "feels" a lot harder than a average #3 The RB300 definetly is a very rare specimen. I have never heard of a single stamped, stainless gripper. Could you please provide a picture? Some of the earliest Ironmind grippers were made with steel handles and they only stamped one of the handles. That's all it means. Quote Link to comment Share on other sites More sharing options...
Benedikt Farsmann Posted October 21, 2010 Share Posted October 21, 2010 Thanks for all these calibrations, but I noticed some wrong convertions from lbs to kg or vice-versa. If you calibrate a gripper using kg plates then post your results in kg if you are not sure with the conversion. Same counts for lb plates. I will convert the numbers for you then, no problem! How to convert exactly: 1 lb = 0.45359237 kg 1 kg = 2.20462262 lbs For example: 68 kg in lbs = 68 * 2.20462262 = 149,914338 lbs (not 150.11 lbs) 150 lbs in kg = 150 * 0.45359237 = 68,0388555 kg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.