Tommy J. Posted January 20, 2021 Share Posted January 20, 2021 (edited) Like the title says. Chime in with your thoughts on thickbar pressing please. personally, I’ve done my share of bench workouts with a thickbar. And I find it to be highly over hyped. I notice zero added difficulty from the thick bar during any part of the press when comparing to a standard barbell. 1. it’s not like bar flex is some kind of aid to a bench. So pressing a rigid axle changes nothing with regards to bar English. (Unless of course you’re a bencher that depends on bounce! ) 2. It’s not like you have to fight to keep a bar in your hand on a press... it pretty much just sits there. And if balanced well enough (elbows staying directly below the hands, etc.), you don’t even have to close your hands around the bar to complete the press. On a side note, I have debated in the past weather regular barbell benching was, or wasn’t a grip feat. ...which was an odd debate imo.. and I believe it’s a foregone conclusion that your grip strength bears little to no significance with regards your bench press. No more than it does on a squat actually. that said, what has me thinking about this is the thought of bench pressing 2 full size Inch DB’s maybe for rep or two sometime in the near future. Yes, I just said that. obviously I’ve never done a double lift from the floor, and would have to skip that part of the feat and just do the press. But hey.. just pressing them seems appropriate for now. but thinking about it, I don’t really see what makes the pressing portion of the feat notable... I understand that dbs in general do add to the difficulty of a bench press when compared to a barbell. Given that there are some balance/stabilizer factors that aren’t nearly as emphasized with a plain ol barbell. but imo, the only cool factor with that feat is the lifting from the floor and getting set up on the bench with the DBs before the press. That is the portion of the feat that is going to make it mega rare to see. also imo, having a half decent press pretty much deletes any shock value with regards to actually pressing a couple of 174lb DBs. Regardless of the handle particulars. I think a lot of folks who just don’t bench those kind of numbers may be impressed with the pressing portion of the feat... but I simply am not. to me, benching a couple of regular grip 200lb+ DBs is incredible. I’m gonna go out in a limb and assume only about a 500lb barbell bencher is going to rep a couple of 200lb’ers. that said though, I do still think it would be kind of fun to give it (the pressing part of the feat) a go. And if successful, I guess it would be cool to say I’ve done it?.. also would be cool to say something nerdy, and along the lines of “smallest man to ever press 2 inch DBs” or something sassy like that. So to cover all my bases with intent to avoid needless debate, and also to emphasize that I’m not a hater of the feat, I’d like to point out a couple factors with Shaws Inch press feat. 1. He lifted from the floor! 2. He got set up in the press position with no assistance (which looked extremely difficult!) 3. He actually repped them in the incline position! (Also super difficult compared to a flat db bench!) that pretty much makes it a badass feat overall! again, I firmly believe that what makes the feat most special is 2 factors. The first being able to lift them from the floor. And the second being wrestling them into the press position and getting set before the press. that said, is the pressing portion even a big deal for a decent bencher? is it something I should bother with attempting when I haven’t even done a true double lift from the floor? what say you? baddass to do just the pressing portion of the feat? Or no? regardless, now that my bench is up, I am intrigued to try it. Edited January 20, 2021 by Tommy J. 3 Quote Link to comment Share on other sites More sharing options...
Lennix Posted January 21, 2021 Share Posted January 21, 2021 I think pressing two dumbbells of 78kg is very strong and impressive. Them being an inch is like meh in the press. The only part which is impressive regarding them being inch dumbbells is the pickup and getting them into position! You should go for it! 1 Quote Link to comment Share on other sites More sharing options...
Tommy J. Posted January 21, 2021 Author Share Posted January 21, 2021 Agreed! And thank you sir. only own 1 inch DB at the moment, but do intend to try the press next time I hook up with the Tx crew. I have no idea if I’ll even get close to a successful press due to the unruly nature of heavy db’s across the board, regardless of handle size. But I’m thinking the press shouldn’t give me a terrible amount of grief so long as I can keep them balanced. To add another note, with dbs you can actually press from a more natural shoulder position than is possible with a barbell. I will update this thread at some point with video if I get it. Hell, I’ll upload a fail vid if that happens as well! would actually be pretty funny if the dbs ate my lunch after all the jaw jacking I’m doing about it! 2 Quote Link to comment Share on other sites More sharing options...
Lennix Posted January 21, 2021 Share Posted January 21, 2021 4 minutes ago, Tommy J. said: Agreed! And thank you sir. only own 1 inch DB at the moment, but do intend to try the press next time I hook up with the Tx crew. I have no idea if I’ll even get close to a successful press due to the unruly nature of heavy db’s across the board, regardless of handle size. But I’m thinking the press shouldn’t give me a terrible amount of grief so long as I can keep them balanced. To add another note, with dbs you can actually press from a more natural shoulder position than is possible with a barbell. I will update this thread at some point with video if I get it. Hell, I’ll upload a fail vid if that happens as well! would actually be pretty funny if the dbs ate my lunch after all the jaw jacking I’m doing about it! Haha well, I can only refer to myself I am a terrible presser. Best bench is 157.5kg but my max with a dumbbell is around 50kg xD Can't wait for the video! Quote Link to comment Share on other sites More sharing options...
JasonD Posted February 3, 2021 Share Posted February 3, 2021 I don’t think a 2” bar adds any more difficulty, but a 3” adds a little. I would think a 2.5” dumbbell handle would be more difficult than a 1”. At any rate, I think it would be a cool visual to bench press two Inch dumbbells. I have a second Inch dumbbell on order. I’ll have a chance to try it in a month or two. 4 Quote Link to comment Share on other sites More sharing options...
JasonD Posted February 27, 2021 Share Posted February 27, 2021 I started doing some benching with a 3” bar again. I like to start from the safeties and perform low reps. 4 Quote Link to comment Share on other sites More sharing options...
Kluv#0 Posted February 27, 2021 Share Posted February 27, 2021 Jason, that was just siick power! Pretty much a close grip, with 3" axle, from a dead stop, no wrist wraps, and destroyed 405 lbs for a double!!!!!!! Crazytown! 2 Quote Link to comment Share on other sites More sharing options...
JasonD Posted February 28, 2021 Share Posted February 28, 2021 6 hours ago, Kluv#0 said: Jason, that was just siick power! Pretty much a close grip, with 3" axle, from a dead stop, no wrist wraps, and destroyed 405 lbs for a double!!!!!!! Crazytown! Thanks Michael! 1 hour ago, Joe Sullivan said: Shall I say ... “Vulgar display of power”?? Thanks Joe! Ha ha, I was listening to that album as I did this! 1 Quote Link to comment Share on other sites More sharing options...
Tommy J. Posted February 28, 2021 Author Share Posted February 28, 2021 Dayuum! Strong AF Jason! Quote Link to comment Share on other sites More sharing options...
Tommy J. Posted February 28, 2021 Author Share Posted February 28, 2021 (edited) as promised, here is my fugly attempt at benching 2 inch DBs. Isaac and Adam told me they weren’t assisting, but I AM glad they stayed with me for the whole rep. We decided on going for the press from the top, as opposed to from the chest. It was certainly easier on me this way, but was more than likely awkward for Adam and Isaac to have to lift the bells up that high by hoisting them up by the globes. Gonna aim to do this again when I get a little stronger. Edited February 28, 2021 by Tommy J. 6 Quote Link to comment Share on other sites More sharing options...
Tommy J. Posted February 28, 2021 Author Share Posted February 28, 2021 Thanks man. real quick I do want to mention a big factor with pressing the bells that I didn’t foresee before feeling them. They literally try to roll off your thumb towards you. You have to basically almost force your hand to flop backwards to create a big enough shelf to keep them balanced. Or it IS mainly still a grip feat on the press portion. if you listen closely, you can hear me ask Isaac to roll his bell outward. I could feel that one trying to overpower my thumb. Being that my right hand and wrist is quite a bit stronger than my left, I didn’t need to request the same to Adam on my right hand. On that hand I was able to turn it the direction it needed to go on my own. Once they are balanced it’s sort of not a big deal to keep them that way if you go slow. I will add that being able to lift a pair from the floor, sit down with them, and kick them up into the press position, then press them, all while keeping the bell movement in check is 100% a MONSTER of a feat. I’m confident in coming to that conclusion after only feeling the press portion of the feat. Hats off to the 2-3 guys who’ve done the whole feat under their own power. 1 Quote Link to comment Share on other sites More sharing options...
JasonD Posted February 28, 2021 Share Posted February 28, 2021 11 hours ago, Tommy J. said: Dayuum! Strong AF Jason! Thanks! 11 hours ago, Tommy J. said: as promised, here is my fugly attempt at benching 2 inch DBs. Isaac and Adam told me they weren’t assisting, but I AM glad they stayed with me for the whole rep. We decided on going for the press from the top, as opposed to from the chest. It was certainly easier on me this way, but was more than likely awkward for Adam and Isaac to have to lift the bells up that high by hoisting them up by the globes. Gonna aim to do this again when I get a little stronger. That is cool! Great work! 1 Quote Link to comment Share on other sites More sharing options...
AdamTGlass Posted February 28, 2021 Share Posted February 28, 2021 Beyound the 78 kg per bell as a tall order- you’re getting a rotation on the hand- and the open hand grip is crushing on the thumb- that’s a monster feat 1 Quote Link to comment Share on other sites More sharing options...
Magiclifts321 Posted August 20, 2021 Share Posted August 20, 2021 If you have any wrist pain pressing with a thicker bar can help that..other than that i dont really notice much of a difference maybe a slightly different contraction in the pecs due to Irradiation 1 Quote Link to comment Share on other sites More sharing options...
Tommy J. Posted August 21, 2021 Author Share Posted August 21, 2021 On 8/19/2021 at 7:02 PM, Magiclifts321 said: If you have any wrist pain pressing with a thicker bar can help that..other than that i dont really notice much of a difference maybe a slightly different contraction in the pecs due to Irradiation Awesome note! Thank you! I don’t currently own a thickbar, but a homie did recently hook me up with some fatgrips. I’ll remember to throw the fat grips on the bar the next time my wrists get kinked. Quote Link to comment Share on other sites More sharing options...
Magiclifts321 Posted August 21, 2021 Share Posted August 21, 2021 13 hours ago, Tommy J. said: Awesome note! Thank you! I don’t currently own a thickbar, but a homie did recently hook me up with some fatgrips. I’ll remember to throw the fat grips on the bar the next time my wrists get kinked. that double inch dumbell press was savage btw 1 Quote Link to comment Share on other sites More sharing options...
climber511 Posted August 22, 2021 Share Posted August 22, 2021 Darned impressive Tommy! It no doubt depends on a lot of factors (and of course I can't even think about doing two Inch DBs) but I do have loadable 2 3/8" handles that I occasionally Bench with - and for me it is a "grip" feat of sorts. Just like you stated it's keeping it controlled and sitting on the palm correctly - and while it's not a "squeeze like" feat it does require some wrist and thumb positioning and maintaining. And that's with the puny weights I use - I can't imagine what 172# does to your wrists and hands. 1 Quote Link to comment Share on other sites More sharing options...
Tommy J. Posted August 23, 2021 Author Share Posted August 23, 2021 (edited) On 8/21/2021 at 5:38 PM, Magiclifts321 said: that double inch dumbell press was savage btw Thanks dude. Been meaning to try it from the floor with straps and without any assistance. Just haven’t made a point to get it done. I don’t own a 2nd inch and also never lifted an inch in my left hand. So the straps are mandatory for me if I go from the floor. im still curious about attempting to wrestle the bells on to me and into the press position after lifting them off the floor. I suspect that is the hardest and most unruly part of the whole feat. Even if I use straps I think that will be the case. I may bring my bell and try it at Adams next time I’m over since he also owns one. …If I can get the gumption to load the bell in my truck before the next time I head over there anyways.. Edited August 23, 2021 by Tommy J. Quote Link to comment Share on other sites More sharing options...
Tommy J. Posted August 23, 2021 Author Share Posted August 23, 2021 (edited) 19 hours ago, climber511 said: Darned impressive Tommy! It no doubt depends on a lot of factors (and of course I can't even think about doing two Inch DBs) but I do have loadable 2 3/8" handles that I occasionally Bench with - and for me it is a "grip" feat of sorts. Just like you stated it's keeping it controlled and sitting on the palm correctly - and while it's not a "squeeze like" feat it does require some wrist and thumb positioning and maintaining. And that's with the puny weights I use - I can't imagine what 172# does to your wrists and hands. Yes, the biggest thing that stood out when I attempted it was how hard the bell in my left hand was trying to rip my thumb off and come towards my head and neck. You gotta dump the wrists back hard and keep the palm flat for the whole duration of being under the bells to avoid that. It seems so anyways. I don’t recall that on the right hand. But that was likely just due to more ideal hand and wrist orientation in the right hand as I was coiling up for the press. thanks for the kind words tho duder! on a side note, @Jedd Johnsonwas getting super close to getting the inch press feat done on a flat bench last time I looked. His sentiments on it could be the most helpful here if there is anyone that has their wheels spinning and is thinking of going for it. Also, IMO, someone please correct me if I’m wrong, doing that feat on a flat bench adds more of a dangerous/badass factor when doing the entire feat. Because if you think about it, you also have to fight the bells trying to crash down on you harder as you lay flat and get into position on a flat bench. The possible crushing of, or something coming out of place due to jolt from laying down will obviously be much more of a factor on flat bench than on an incline. although the press portion of the feat will be much more difficult on an incline… So where you gain advantage on the press portion when done on a flat bench vs an incline, you also lose more ground on the danger/pucker factor when attempting it on a flat bench. Edited August 23, 2021 by Tommy J. Quote Link to comment Share on other sites More sharing options...
Tommy J. Posted August 23, 2021 Author Share Posted August 23, 2021 Okay so I experimented a bit with the fatgrips today towards the end of my bench session. so the fatgrips are a bit more squishy when benching with them than I’m comfortable with. I’ve yet to try it on an axle. but I suspect that the axle will feel much better and feel more predictable than the fatgrips. I guess I could describe the fatgrips as never really being able to “feel” the bar. Which was a bit unsettling. Other than not trusting the squishy grips to keep the bar from making any sudden changes in geometry, I sort of do like the feel it gave throughout the rest of the chain. After messing with this a bit, I can definitely see a fatter bar sort of forcing perfect bar path. Which I admit can and will be a beneficial variable to add to bench training. as stated in the video, I will not be adding the fatgrips into my bench program. Although I will be stewing about making an axle just so I can bench with it. Quote Link to comment Share on other sites More sharing options...
fortes mãos Posted August 23, 2021 Share Posted August 23, 2021 Hell Yeah Tommy dats big power braadah! It does seem sketchy with those pads moving. 1 Quote Link to comment Share on other sites More sharing options...
Tommy J. Posted August 23, 2021 Author Share Posted August 23, 2021 5 hours ago, fortes mãos said: Hell Yeah Tommy dats big power braadah! It does seem sketchy with those pads moving. Thanks homie! yeah man the fatgrips on a bench are a thumbs down IMO. Too squishy for them to be a safe or even a consistent training variable. Quote Link to comment Share on other sites More sharing options...
Tommy J. Posted August 23, 2021 Author Share Posted August 23, 2021 3 hours ago, Joe Sullivan said: Beard is looking ON POINT!! Thanks man. It’s in its fugly state right now IMO. Just hit the 4 month mark. Last time I grew it out it I wasn’t happy with it till like the 10 month mark. funny meme I saw some time back said “ladies, the reason you are attracted to men with big beards is because you know he not only has patience to grow that beard, but that beard also proves he has enough patience to put up with your shit.” Quote Link to comment Share on other sites More sharing options...
Tommy J. Posted August 24, 2021 Author Share Posted August 24, 2021 2 hours ago, Joe Sullivan said: I shaved mine down so much because of the mask I have to wear at work. Was like I was hit in the face by a Mack truck it was dented so bad after each shift. I was not happy all that hard work wasted. Yeah masks ruin a good beard. Better off for the beard wearing a bandana as opposed to a mask. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.