David Ostlund Posted April 21, 2004 Posted April 21, 2004 Jeff Peterson and I were discussing when we should have another bending and grip party and felt that Sunday the 2nd would be a good date. Anyone who wants to come for this is welcome. I know that I am more apt to hit a PR with lots of people around, so the more the better. We have a lot of new stock for people to try. About five sizes of steel between 1/4" and 5/16". If you have any interest in this let Jeff or myself know. Quote
JeffPeterson Posted April 21, 2004 Posted April 21, 2004 I have a couple hundred grade 5's, lot's of differant 60d's. Hex, brass, flat bar, lot's of steel inbetween a blue and a red, 100 grade 2's some Challange bars, lots of HR and CR stock of various thickness and whatever else I buy this weekend from Home depot and seven corners hardware the best hardware store in MN. BC M'2 Gordon V. C. Munger Jeff Ford Joel Sward Matt Vanwheele and anybody else reading this Come on over. Quote
dubthewonderscot Posted April 21, 2004 Posted April 21, 2004 David, where did you find those extra size's? Would you care to share you're source? w Quote Weldon Stogsdill
CMunger Posted April 21, 2004 Posted April 21, 2004 I'll try to make it. Hopefully I'll have my grass seeded by then. Quote Gunther says: "Stand up to cyber-bullies."
David Ostlund Posted April 21, 2004 Author Posted April 21, 2004 Weldon, I got them from www.mcmaster-carr.com. You can go there or anywhere else that sells drill rod. Quote
JeffPeterson Posted April 22, 2004 Posted April 22, 2004 Gordon V. is down for it. As am I, my 2 brothers, Ben Hazelman, Joe Erickson( probably) and Dave O and C. Munger. That's 8 anyother takers. Quote
JeffPeterson Posted April 23, 2004 Posted April 23, 2004 The party is going down at 2. Hope everyone can make it. There will be well over 1,000 pieces of metal to bend. Well over. Ranging from the world's eaiest 3/16 stock to steel thicker then a red. Quote
terminator Posted April 23, 2004 Posted April 23, 2004 "over 1000 pieces of metal to bend" Wish I lived closer, sounds like my kind of fun! Quote Real name: Pat Povilaitis
dubthewonderscot Posted April 23, 2004 Posted April 23, 2004 Ok guys, that online source for steal is awesome! I ordered Wednesday and got it yesterday. That is great service! Thanks for the heads up on that place. I think I'll be using it quite a bit in the near future. W Quote Weldon Stogsdill
terminator Posted April 23, 2004 Posted April 23, 2004 You should fly in for it Pat. Being that it is my Wedding anniversary it's probably better I wait for another one. "I may be crazy but I ain't dumb"-----Cooter Davenport Quote Real name: Pat Povilaitis
bseedot Posted April 23, 2004 Posted April 23, 2004 I'm down for it. Are chicks welcome? BC. Quote The cure for boredom is curiousity. There is no cure for curiousity.
David Ostlund Posted April 23, 2004 Author Posted April 23, 2004 If you can get them to want to come to a bending party they are. Jeff and I aren't bringing our women since it's a no whining allowed bending party. Quote
SqeezeMasterFlash Posted April 23, 2004 Posted April 23, 2004 I'll be there. My woman most likely won't be Quote Dwell not upon your weariness, for your strength shall be according to the measure of your desire. Jeff Ford
David Ostlund Posted April 23, 2004 Author Posted April 23, 2004 Good to hear Jeff. How have your bending workouts been going? Quote
bseedot Posted April 23, 2004 Posted April 23, 2004 This is all still new to her so she doesn't know any better. She was pretty impressed during Jeff and M2's MMG Certification and then Gordon ripped a Minneapolis phone book in half and I saw her eyes widen. I'll see if she's interested but thought I'd ask y'all first. I figure that with chicks there we'll all want to do our very best to show them how cool we really are. BC. Quote The cure for boredom is curiousity. There is no cure for curiousity.
Matt Van Weele Posted April 23, 2004 Posted April 23, 2004 Sounds like fun. If I was a decent bender I would make an effort to be there. Hope you guys get some of pr's. Quote Real Name: Keyser Söze When the One Great Scorer Comes To mark against your name, He writes not whether you won or lost, But how you played the game. You have a gift Roy but it's not enough.
Emsquared Posted April 23, 2004 Posted April 23, 2004 I should be able to make it M2 Quote Goals achieved COC #3 certified closed 2003 V-bar lift 300lbs 2003 Blue nail bend 2003 Beef Builder Elite gripper close 2003 205.7 lbs Rolling Thunder 2005 Blob lifted 2005
DAN PETERSON Posted April 26, 2004 Posted April 26, 2004 Hopefully lots of people can make it. The basment seems to be prone to giving prs lately Quote St. Paul Minnesota
DAN PETERSON Posted April 26, 2004 Posted April 26, 2004 Gordon is there anyway you could bring some more cans. I am determined to break one. Quote St. Paul Minnesota
JeffPeterson Posted April 26, 2004 Posted April 26, 2004 Come see a real live red bender. I bet he does something crazy on May 2. Quote
GordonV Posted April 26, 2004 Posted April 26, 2004 DAN PETERSON Posted on Apr 26 2004, 09:18 AM Gordon is there anyway you could bring some more cans. I am determined to break one. I'll bring at least a 12pk and some gloves. I will also bring my 10lb sledge and bucket of timber ties, hopefully Mr. Ford will bring his heavier hammers. This Griptogether should produce some great footage. Quote Gordon Vizecky Minneapolis, MN
JeffPeterson Posted April 26, 2004 Posted April 26, 2004 It's nice to have an expert videoman on hand. Quote
JeffPeterson Posted April 27, 2004 Posted April 27, 2004 So far Jeff P. Joe P. Daniel P. Dave O. C. Munger Gordon V. Ben H. Joe E. Jeff Ford BC Dot Emsquared Quote
DAN PETERSON Posted April 29, 2004 Posted April 29, 2004 We should weigh all the metal that gets bent by all of us that day. Quote St. Paul Minnesota
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.