Jump to content

Ways To Improve Bending Strength And Technique

Jedd Johnson

Recommended Posts

When people bend nails, bolts, and steel stock, it is not uncommon for them to get stuck at a certain point along the way. One common spot where people have difficulty progressing with bending is when they get to the Grade 8.

If you are not familiar with the Graded bolts used for bending, we are generally talking about 6-inch long and 1/4-inch thick bolts that are made under strict manufacturing conditions to resist bending. In fact, when you attempt to bend a Grade 8 bolt, it will actually flex back on you if you do not do enough damage to it.

Being stuck at a certain nail, bolt or steel bar generally is caused by one of two things.

Either you are not strong enough, or there is a problem with your technique, or BOTH.

If you are stuck at the Grade 8, we can use Grade 5’s to help the situation. If you wrap electric tape or duct tape around the center of the Grade 5, you will reinforce it and make it tougher to bend. This would be my first suggestion, to see how far you can put a kink into it with your current technique.

The next suggestion I have is to run down through this post: Improving Kink Strength.

That post is all about improving the kink, and was written especially for someone else who was having trouble finishing off Grade 8 Bolts, so run down that post and see if any of the suggestions will help you out.

If you feel that strength is not the issue, then it is probably technique. Are you not loading tension into the bar? Are you standing too straight up? Are your hands too close together? There are lots of variables here, depending on which bending style you use, what kind of wraps you use, your body type, the positions your body likes to operate in, etc. These techniques are all covered in extreme detail in my Nail Bending eBook.

In review:

1. Load up tape on the center of a Grade 5 Bolt and give it a try to see if you can get it (test your strength).

2. Review the “Improving the Kink” post, here: Improving Bending Strength (force production and technique)

3. Review the various technique run-downs in the Nail Bending eBook. See if there is something that might be off, and try changing things up (technique)

If it is not one of these two things (or a combination of both) then the only possible thing I can think of is that you are not attacking that thing like a savage beast.

Remember, you are doing something that you’re not supposed to do. That Grade 8 bolt was not made to be bent with human hands. If it were, it would be easy to do, and what’s awesome about that?

Attack it with a savage beast mentality like you are going to tear down an entire town with all of your rage. Keep your technique dialed in and commence with the hostile takeover of the Grade 8 Bolt.

Hopefully this helps you out.

Be a Savage Beast!


P.S. If you are struggling with a bend and need help, don’t forget about the two best Bending resources on the planet: the Nail Bending eBook and the Nail Bending DVD.

  • Like 1
Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy policies.