Wes Posted June 20, 2006 Share Posted June 20, 2006 What is the usual mounting on the Elite and Super Elite grippers? Quote Link to comment Share on other sites More sharing options...
MVillani1985 Posted June 20, 2006 Share Posted June 20, 2006 What is the usual mounting on the Elite and Super Elite grippers? Standard mounting for all grippers (unless custom ordered) is flush mounting AFAIK. Quote Link to comment Share on other sites More sharing options...
acorn Posted June 20, 2006 Share Posted June 20, 2006 Forgive my ignorance but is flush mounting based on a specific distance to the center of the spring eye? Like 4.625"? - Aaron Quote Link to comment Share on other sites More sharing options...
porkchop Posted June 20, 2006 Share Posted June 20, 2006 All of my standard BB grippers from BBM through BBGE have a mounting of 1/16". The only discrepency to that is one side of my BBSM is flush and the other is 1/16", making it one of the toughest BBSMs I've tried. pc Quote Link to comment Share on other sites More sharing options...
pdoire Posted July 11, 2006 Share Posted July 11, 2006 I just measured my Elite against all my other 17 grippers and it has the deepest mounting of all of them..it is a tough SOB. I have a few flush mounts and I just took about half an hour to lay them on top of one another exactly to see the differences and then I measured with a machinsts ruler I have..this Elite is about 1/16 below flush!! The spring actually is lower than the top of the handles by that amount. I also have a flush mount "Cert" BBSM from Warren and that is a tough BBSM too. I believe standard is a bit of disatnce maybe a 1/16 or so..most of my normal grippers are like this IE RB's..most IM's..etc. Ready...grippers vary..but most of mine are right on...I do not have an "easy" gripper in the bunch! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.