Donc101 Posted August 9, 2020 Share Posted August 9, 2020 2 hours ago, Horrido said: Ok, if any of you US benders is interested to make a bulk order just let me know. In the meantime.... Yesterday we had a new entry: Amir Bayour certed the A2 bolt with a nice view in the @Donc101 area. Nice to see how benders get other benders to the cert. Here is the Video: Amir and Chris both did great. Did you get Chris's video too? Amir does not do much DO. We tweaked his form a bit and he bent harder steel than he ever has DO. He has a bright future with DO. 1 Quote Link to comment Share on other sites More sharing options...
Horrido Posted August 10, 2020 Author Share Posted August 10, 2020 7 hours ago, Donc101 said: Amir and Chris both did great. Did you get Chris's video too? Amir does not do much DO. We tweaked his form a bit and he bent harder steel than he ever has DO. He has a bright future with DO. Sounds good! Yes got the Video from Chris, too. But unfortunatley I can't accept it because of the finger taping. Sorry for that. 2 Quote Link to comment Share on other sites More sharing options...
Horrido Posted August 17, 2020 Author Share Posted August 17, 2020 Another new bender on the list... Martin from the USA certed on the 4.8 bolt and want to climb the ladder in the certs. Here is his video: And a lot of new packages are on the way to Sweden, Ukraine, England and Germany. More to come... 3 Quote Link to comment Share on other sites More sharing options...
Horrido Posted August 18, 2020 Author Share Posted August 18, 2020 Two new guys today. Very happy to see a lot of new and unknown benders out there! The bending Community will grow and that's great. Adam from USA certed the 4.8 bolt. Without a open video unfortunatley. And Siamak @bruce1337 from Sweden also certed the 4.8 bolt in a very fast way. Here is his Video: 3 Quote Link to comment Share on other sites More sharing options...
bruce1337 Posted August 18, 2020 Share Posted August 18, 2020 Thank you @Horrido I started bending a few months ago so I am still very new and have a lot to learn. Glad to be part of the bending community 2 Quote Link to comment Share on other sites More sharing options...
Horrido Posted August 19, 2020 Author Share Posted August 19, 2020 New Cert today. Cody the man behind @Beyond the Bend Podcast was able to bend the A2 bolt with a length of 6,5". Nice bend and I think there is a lot more in the tank. Here is Cody's video: 5 1 Quote Link to comment Share on other sites More sharing options...
Horrido Posted August 22, 2020 Author Share Posted August 22, 2020 another one from @bruce1337 direct out of sweden. He bend the A4 bolt with ease. The A2 will fall soon. List was updated and here is the video: And we have some new and strong benders soon on the list. Watch out. 4 Quote Link to comment Share on other sites More sharing options...
Horrido Posted August 27, 2020 Author Share Posted August 27, 2020 Two new certs today from our italian brothers in steel. Also a small website update with some fixes. Giorgio Giannico from GBI Italia and Nico Oliveto certed on the 4.8 bolt with ease. There is a lot more in the tank for both and I thin we will see bigger bends soon. Here are the two videos: 3 Quote Link to comment Share on other sites More sharing options...
Horrido Posted September 8, 2020 Author Share Posted September 8, 2020 Update in the last couple days. The german Richard Siebels was able to bend the A2 bolt with a length of 5,5" in a short time. Well done. Also the two italians Giorgio and Nico certed on the A2 Bolt. Bending Powerhouse @Donc101 bent the A2 bolt in one IMP with ease as expected. NIce to see every week new bends. 5 Quote Link to comment Share on other sites More sharing options...
Horrido Posted September 14, 2020 Author Share Posted September 14, 2020 New update... Dave Nisbet from Canada, very new to bending, was able to bend the A2 bolt cut down to 6" with single leather pads. This is a very good bend for a beginner and I think this man will have a bright future in the steel bending game. Very happy to see brand new guys along with the old ones! Also @Donc101bend the A2 bolt with 6" for the one IMP bend section. I added it also on the main cert list (waiting for your 8.8 cert, Don. Keep going!) Here are both videos for you: 4 Quote Link to comment Share on other sites More sharing options...
Horrido Posted September 15, 2020 Author Share Posted September 15, 2020 And another update. This time from russia. The russian bender Valery Semenov bent the A2 bolt at 5" yesterday. Great work and a very short bar. Would be interesting to see how short we can go on the A2 bolt. Also would be great to have more russians on the list, but the most important aspect is the language barrier in this case. But the actual russians have great bends here. The video: 1 Quote Link to comment Share on other sites More sharing options...
Horrido Posted September 16, 2020 Author Share Posted September 16, 2020 Some useful news especially for our american friends.... Since yesterday the USA allows normal packages again to send to their country. The price for sending 5kg packages is normal again, only the delivery time is another. This are the details: 5kg package normal = 37€ - 4-6 weeks (sea freight) 5kg package prio = 53€ - 1-2 weeks (air freight) Hopefully the time will bring the normal standard back with smaller packages and cheaper shipping costs. Sorry, but USA is the only country with these regulations. Another thing. Gil Goodman rated the following bolts after the Krahling method for info and comparsion: Bolt 8.8 zinc OF - 540lbs Edgin Triangle - 610lbs Bolt 8.8 black OF (Horrido) - 630lbs Bolt 10.9 black OF (Horrido) - 730lbs (please note, that Edgins vary a LOT) 4 Quote Link to comment Share on other sites More sharing options...
Horrido Posted September 26, 2020 Author Share Posted September 26, 2020 Some updates this week... Anton @Slippery Pete from sweden bent the A2 bolt at 6" length. Very good progress and there is more to come from Anton. I am sure. Also Anton has one of the best "bending table" I have seen! Then our powerhouse Delmar @acromegaman got his package and bent directly the A2 bolt in one IMP very easy. The 8.8 will fall soon for Delmar, also happy to have him as a part of the project. Here are the two videos: And good news on the shipping front. USA is back to normal shipping methods. This mean: 2kg package for 20€ and 5kg package for 37€. 4 Quote Link to comment Share on other sites More sharing options...
Donc101 Posted September 26, 2020 Share Posted September 26, 2020 Great job guys! Very happy Delmar is back at it. 1 1 Quote Link to comment Share on other sites More sharing options...
acromegaman Posted September 26, 2020 Share Posted September 26, 2020 55 minutes ago, Donc101 said: Great job guys! Very happy Delmar is back at it. Me too 2 Quote Link to comment Share on other sites More sharing options...
Horrido Posted October 7, 2020 Author Share Posted October 7, 2020 New update from the american bender Gil Goodman. He was able to bend the A2 bolt with a length of 5,5". Short and strong bend and he climbed the ladder on the cert list a little bit higher. Here is his video: 4 Quote Link to comment Share on other sites More sharing options...
Horrido Posted October 7, 2020 Author Share Posted October 7, 2020 From now on in every package there will be a papercard as a prototype. Maybe there will be one out of steel in the future... Little side effect is that you can see if the bend is done. It's exactly 5cm (2") in the width. 4 Quote Link to comment Share on other sites More sharing options...
Horrido Posted October 8, 2020 Author Share Posted October 8, 2020 Great bend from our very strong and well known bender, Don Cummings @Donc101 he bent the 8.8 bolt with style and climbed the cert ladder. I hope to see more 8.8 bends in the future. 4 Quote Link to comment Share on other sites More sharing options...
Horrido Posted October 20, 2020 Author Share Posted October 20, 2020 So, I was on the road for about a week and now we have a big update with lots of good bends. The list is growing from week to week which is a very nice fact. Also more packages are on their way to the benders. USA is here on the frontline. Check out the Cert List: https://www.horrido-bending.com/cert-list More projects are planned and will be published soon. Always working to get this thing better and bigger. Here are the new bends from last week: @Donc101@acromegaman @Tom Flesher @bruce1337 6 1 Quote Link to comment Share on other sites More sharing options...
Fist of Fury Posted October 20, 2020 Share Posted October 20, 2020 Any plans for a reverse & DU list (40 degrees)? Would be fun to have something to work for when you can't bend DO. 1 Quote Link to comment Share on other sites More sharing options...
Horrido Posted October 20, 2020 Author Share Posted October 20, 2020 10 minutes ago, Fist of Fury said: Any plans for a reverse & DU list (40 degrees)? Would be fun to have something to work for when you can't bend DO. Yes, I am working on that and by the end of the year it will be online. 4 1 Quote Link to comment Share on other sites More sharing options...
bruce1337 Posted October 20, 2020 Share Posted October 20, 2020 22 minutes ago, Horrido said: Yes, I am working on that and by the end of the year it will be online. Should be fun to try some reverse bending Quote Link to comment Share on other sites More sharing options...
Horrido Posted October 25, 2020 Author Share Posted October 25, 2020 Leopold Challenge Vol II This is a quote from a bender out there... Who can name this bender? First right answer will get a sticker set with some extras. Let's go... Quote Link to comment Share on other sites More sharing options...
Horrido Posted October 26, 2020 Author Share Posted October 26, 2020 Small update... My brother in law was again here for some bending and could cert on the A4 bolt. Next step for him is the A2 and he will get it the next time for sure. Video: 3 Quote Link to comment Share on other sites More sharing options...
Horrido Posted October 26, 2020 Author Share Posted October 26, 2020 And another one from the USA. Mike Johns (a performing strongman) bent the A2 bolt for a succesfull cert this morning. Very well done! 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.