ewokhugo Posted February 26, 2009 Posted February 26, 2009 before i went to the bed i thought to myself ... it would be funny to ask this quest ... here i go ... David : really eager to watch u to do some DO bends ... maybe one shiny/grand/mag in IM wraps? Foxman: what about one bastard using reverse style? i never watched any video of u doing reverse bend. Darin: i want to watch your bastard bending cert video!! Perry: killing one red(u will get them soon)! Mike/Auto: g8 DU in IM wraps! Doug: Shiny bastard under 5 mn! Joonas: 8 mm stainless under 5 mn! Gabriel Sum : square 7" DU !(what????) just to name a few Quote Hugo Sá e Castro 33, 6"0", 200 lbs.
foxyj75 Posted February 27, 2009 Posted February 27, 2009 I'll do you one better Hugo; here's a couple reverse bends of 7'' and 6'' 5/16'' 0-1 drillrod. I did these a couple months ago. reverse bends of 5/16'' 0-1 DR Quote Phil. 4:13 Psychotic bending, shiny-headed Jesus freak......and proud of it!! My Videos
ewokhugo Posted February 27, 2009 Author Posted February 27, 2009 thanks "Fox"!:-)) Quote Hugo Sá e Castro 33, 6"0", 200 lbs.
easyWeight Posted February 27, 2009 Posted February 27, 2009 (edited) I'm still waiting on my FBBC stock. Hopefully it will be here today and I'll make that video Hugo. Does anyone know what the current Bastard and Red Nail calibrates at? Edited February 27, 2009 by easyWeight Quote der Bär My YouTube
easyWeight Posted February 27, 2009 Posted February 27, 2009 I'll do you one better Hugo; here's a couple reverse bends of 7'' and 6'' 5/16'' 0-1 drillrod. I did these a couple months ago. reverse bends of 5/16'' 0-1 DR Is drillrod harder than CRS? Quote der Bär My YouTube
nickr104 Posted February 27, 2009 Posted February 27, 2009 Yes drillrod is hardened because they use it to make drill bits. Quote Nick RosendaulI am a Upser"I slept with John Eaton and lived to tell about it!"
cberg Posted February 27, 2009 Posted February 27, 2009 I'm still waiting on my FBBC stock. Hopefully it will be here today and I'll make that video Hugo. Does anyone know what the current Bastard and Red Nail calibrates at? My bastard was 480 and red nail 450ish i think. I got these a few months ago though so I dont know if its still the same Quote Caolan Berg age: 21 height: 5'8 weight: 200
easyWeight Posted February 27, 2009 Posted February 27, 2009 I'm still waiting on my FBBC stock. Hopefully it will be here today and I'll make that video Hugo. Does anyone know what the current Bastard and Red Nail calibrates at? My bastard was 480 and red nail 450ish i think. I got these a few months ago though so I dont know if its still the same Thanks! I just bent my first Bastard (video coming when I'm done bending!). There is a definite difference between the Reds I have and the Bastard I just bent. Quote der Bär My YouTube
cberg Posted February 27, 2009 Posted February 27, 2009 nice job man cant wait to see the vid!! Quote Caolan Berg age: 21 height: 5'8 weight: 200
foxyj75 Posted February 27, 2009 Posted February 27, 2009 I'll do you one better Hugo; here's a couple reverse bends of 7'' and 6'' 5/16'' 0-1 drillrod. I did these a couple months ago. reverse bends of 5/16'' 0-1 DR Is drillrod harder than CRS? Darin, 0-1 drillrod is somewhere between a bastard and a shiny. Closer to the bastard. Quote Phil. 4:13 Psychotic bending, shiny-headed Jesus freak......and proud of it!! My Videos
ewokhugo Posted February 27, 2009 Author Posted February 27, 2009 i'd like to watch Caolan doing the 5" square(DU):-) sorry mate i forgot to mention your name. Quote Hugo Sá e Castro 33, 6"0", 200 lbs.
cberg Posted February 28, 2009 Posted February 28, 2009 haha thats fine buddy but wouldnt you rather see a huge shiny bent. I think im closer to that one right now . I want to see something from you too Hugo! More animal power!!! You ready to start bending again? Quote Caolan Berg age: 21 height: 5'8 weight: 200
David_wigren Posted February 28, 2009 Posted February 28, 2009 I havn't bent DO serious since July or something, since then I've only done 6 or 7 bends total DO. Might still be able to pull of a huge bastard(480 stock) or a shiny in IMP. Managed the shiny about a month ago and got it just under 5 minutes. I'm not 100% sure that I can do a shiny now though. Some animalpower might help though. Quote
d.sides Posted February 28, 2009 Posted February 28, 2009 Hugo, have you bent the golden I sent? I want to see it! Quote
gumpster Posted February 28, 2009 Posted February 28, 2009 I'll give a red my best shot when I get my hands on one. The general opinion that recent reds are easier than bastards makes me more hopeful. I think this thread is going to motivate some of these guys to go kill some bars - good idea Hugo! Quote Name: Perry6'4", 170lbsGoals:MMS close #3 - 11May2010...after 3yr 4mo on grippersRed/Bastard
ewokhugo Posted February 28, 2009 Author Posted February 28, 2009 thanks guys! i need some motivation as well .. i may lost some "animal power" dont know why (my mind its tricky sometimes) i thougt about doing some bending outside my garage ..mountains or something it may helps. Doug , no yet bro, i only have one(yours) i am keeping it with me untill i am ready to bend it. because my crush need lots of work i will eventually bend it when this area improves. or will do it next week! lets see:-))) Caolan, oh yes! i'd like to watch u bending the hshiny on video! i got some small injuries(hands) and the last one was in my lower back. but i wont give up to reach my goals.thanks. David, its time to start DO again (more often) it will add some "fresh air" to u i think ...:-) Perry, i dont have any doubt u will bend it! i am serious ,u are a much better bender then u were 1 month ago:-) Quote Hugo Sá e Castro 33, 6"0", 200 lbs.
easyWeight Posted February 28, 2009 Posted February 28, 2009 Hugo, have you bent the golden I sent? I want to see it! Hugo has a Golden? I look forward to seeing it!! I'll give a red my best shot when I get my hands on one. The general opinion that recent reds are easier than bastards makes me more hopeful. I think this thread is going to motivate some of these guys to go kill some bars - good idea Hugo! I sent you a p.m. Quote der Bär My YouTube
ewokhugo Posted February 28, 2009 Author Posted February 28, 2009 yes i have a golden send by Doug!:-) why?:P Quote Hugo Sá e Castro 33, 6"0", 200 lbs.
easyWeight Posted February 28, 2009 Posted February 28, 2009 yes i have a golden send by Doug!:-) why?:P Because I want to see you bend it!!!! Quote der Bär My YouTube
David_wigren Posted February 28, 2009 Posted February 28, 2009 Tried a 7" shiny in IMP today and I didn't get it I may have underestimated the kink on that thing. Usually they just fold like nothing, but that was in the past. Heck the shiny was really hard. I still killed it, but I had to rest alot inbetween. Quote
matthcarl Posted February 28, 2009 Posted February 28, 2009 I still killed it There's the main part! Quote Name: Matt Carl Runner, Graphomaniac, Steel Bending Fiend
ewokhugo Posted February 28, 2009 Author Posted February 28, 2009 good work David! its VERY impressive i am proud and u should be as well. u have not been doing any DO bends for MONTHS!!! Darin, i will give it a try:-) Quote Hugo Sá e Castro 33, 6"0", 200 lbs.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.