Jump to content

5/16 5 1/2 Hrs


big nasty

Recommended Posts

Just like the 2 Grand's I have tried I got it to 90 pretty fast and BRAKE'S I kept working it got it past 90 got it to 2 1/2 inches BRAKE'S got pissed off. I kept hitting it 5 minute's later it was down to 1 inch. I guess I should get pissed more often was happy after but I think I pushed it a little hard kind hurtin wrist and shoulder's. I will heal up hit another workout Sunday I have noticed that some of the stock I get from the scrap yard varies.

'' KETTLEBELL'S MAKE A MAN OUT OF YOU ''

'' JUST A LITTLE FISH IN A BIG POND ''

Link to comment
Share on other sites

Nice bending. I've heard rumors that some HRS is real tough.

Name: Matt Carl

Runner, Graphomaniac, Steel Bending Fiend

Link to comment
Share on other sites

Nice bending. I've heard rumors that some HRS is real tough.

I not saying this stuff is like CRS Matt but this latest batch seem's to be harder than the last I bought. I plan to try a 6'' next time and see what happen's that 5 1/2 was rough. I am sitting around iceing my wrist right now.

'' KETTLEBELL'S MAKE A MAN OUT OF YOU ''

'' JUST A LITTLE FISH IN A BIG POND ''

Link to comment
Share on other sites

Is it A36 right? If so that stuff really ramps up on the crush due to the broad apex it bends with but the kink isn't bad at all. a 6" piece cal'd at 370 which is lower than a G5 but the crush is almost as hard as a G8.

Link to comment
Share on other sites

Is it A36 right? If so that stuff really ramps up on the crush due to the broad apex it bends with but the kink isn't bad at all. a 6" piece cal'd at 370 which is lower than a G5 but the crush is almost as hard as a G8.

Yes Derek A36 you are right on it went to 90 fast and then Brake's from 2 1/2 to 1 inch I got mad and worked it down I thought it go better from start to finish than it did.

'' KETTLEBELL'S MAKE A MAN OUT OF YOU ''

'' JUST A LITTLE FISH IN A BIG POND ''

Link to comment
Share on other sites

Is it A36 right? If so that stuff really ramps up on the crush due to the broad apex it bends with but the kink isn't bad at all. a 6" piece cal'd at 370 which is lower than a G5 but the crush is almost as hard as a G8.

Yes Derek A36 you are right on it went to 90 fast and then Brake's from 2 1/2 to 1 inch I got mad and worked it down I thought it go better from start to finish than it did.

Yeah dude those things are brutal when they get short. I still have a 4.5" piece that's been stuck at 2.75" for a LONG time :D

Link to comment
Share on other sites

Is it A36 right? If so that stuff really ramps up on the crush due to the broad apex it bends with but the kink isn't bad at all. a 6" piece cal'd at 370 which is lower than a G5 but the crush is almost as hard as a G8.

Yes Derek A36 you are right on it went to 90 fast and then Brake's from 2 1/2 to 1 inch I got mad and worked it down I thought it go better from start to finish than it did.

Yeah dude those things are brutal when they get short. I still have a 4.5" piece that's been stuck at 2.75" for a LONG time :D

That make me feel a little better Derek thank's. :D

'' KETTLEBELL'S MAKE A MAN OUT OF YOU ''

'' JUST A LITTLE FISH IN A BIG POND ''

Link to comment
Share on other sites

On the other hand...you did crush a 5/16"x5.5" bar to an inch :bow

Name: Matt Carl

Runner, Graphomaniac, Steel Bending Fiend

Link to comment
Share on other sites

On the other hand...you did crush a 5/16"x5.5" bar to an inch :bow

Thank's Matt I guess I should go with the glass half full not half empty. I am still so new to this sometime's I dont know what is good or bad. I am glad I have you guy's to keep me straight. I know pretty high class problem huh. :D

'' KETTLEBELL'S MAKE A MAN OUT OF YOU ''

'' JUST A LITTLE FISH IN A BIG POND ''

Link to comment
Share on other sites

Sorry Jason, didn't mean to be condescending, but I've been at this a LOT longer than you and if you can get a Grand to 90 your HRS must be tough because I did a 5.5" LONG before I could even get a Big bastard

Link to comment
Share on other sites

Sorry Jason, didn't mean to be condescending, but I've been at this a LOT longer than you and if you can get a Grand to 90 your HRS must be tough because I did a 5.5" LONG before I could even get a Big bastard

You have to stop useing those big word's Derek I am confused. :blink

Just playin dude you did'nt o-fend I have been playing with all this Brass and Stainless and HRS I got from the scrap yard problem is they dont know what it is and neither do I. :D

'' KETTLEBELL'S MAKE A MAN OUT OF YOU ''

'' JUST A LITTLE FISH IN A BIG POND ''

Link to comment
Share on other sites

Nice bending Jason! I had a batch of 5/16" HRS a few years ago that was harder than most CRS...including FBBC stock. Just ask Eaton, I know he remembers it!

Link to comment
Share on other sites

Nice bending Jason! I had a batch of 5/16" HRS a few years ago that was harder than most CRS...including FBBC stock. Just ask Eaton, I know he remembers it!

Yea Ben I don't think it's me my warm up went great blew through some stuff felt good. I thought this would be tough but I could get it ok trying to work around 5 1/2 to work toward's the grand at the end of the month. Man was I wrong that thing brutalized me but I got it back crushed it to 1'' it just toke a while. :D

Edited by big nasty

'' KETTLEBELL'S MAKE A MAN OUT OF YOU ''

'' JUST A LITTLE FISH IN A BIG POND ''

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy policies.