1st Attempt At Dunksters 10mms Stainless.

[gazza]

Heres a video split into 2 parts of my 1st encounter with DUNKSTERS 10mms stainless he sent me.

I got it past 90degrees on my first session on thurs 12th april 2007 and yesterday friday 13th i finished it under 2inches.

heres the video in 2 parts of the first session i didnt video the 2nd session no piont really.

Part one.

http://www.youtube.com/watch?v=v_DjIPa5SIQ

Part two.

http://www.youtube.com/watch?v=TtOAXG18sTk

[liam.mccaffrey]

that really is a big milestone, especially for all the metric people among us gaz, well done mate

keep it up!!

[antarath]

Amazing my friend!! NO LIMITS, aye??!

And get a new caliper ! hahaha

Mats

[neilkaz]

Simply awesome, bro

I think we all know what the result of your third session with 10mm stainless will be. You will take it down and in one session.

10mmS in not your limit ! You have no limits.... too Gazza, the best

.. neilkaz ..

[gazza]

Amazing my friend!! NO LIMITS, aye??!

And get a new caliper ! hahaha

Mats

Mats

!st the calliper went down then the bloody video tape ended i didnt realise till i looked up and saw a blank screen thought it was the battery but it was the end of the tape i carried on for about a minute but realised there was no piont at that time as there would be no video of the rest of it.

Seems the gods were against me that day

[antarath]

I think the caliper just tried to psyche you up and give you the anger needed for the bend

Mats

[dimmers]

Brilliant Gazza! keep the vids coming, they're brilliant! good to see you REALLY struggle for a change with a piece of steel shows us that you're human after all!

i don't think that 10mm will be safe in a week or so though, please post another vid destroying it!

congrats matey!

[gazza]

No excuses just not strong enough on the day.

The KINK took alot more outa me than i thought tho because the next days session the crush werent that bad not as hard as the HUGE KOASB ans that was after 3 other bends maybe i was still recovering from that session.

[Booyah!!!]

Hi Gazza, I was thinking I would bend one of those tomorrow. Then I woke up. Maybe one of these days I can stay there a little longer. Another Great Bend Man!!!

[Cunny]

wow

never seen anything like your vids before.INTENSE

[Tim71]

Booyah,

I'm like you on that one. I always seem to wake up before I can knock Gazza out of the #1 spot ha ha!

Gazza, This is just a huge inspiration as to what's possible. When we finally find out what your lifetime max bend is it will be something else.

No limits indeed!

Tim

[dimmers]

After watching your latest vids Gazza, i heard you mention the name Alexander Zass and ended up giving the name a Google. Well i found the following,

http://www.sandowplus.co.uk/Competition/Zass/zassintro.htm

very interesting read! I know you're always driving home the message about Isometrics, but i think this made the point even clearer!

(worth a read people)

cheers

[gazza]

After watching your latest vids Gazza, i heard you mention the name Alexander Zass and ended up giving the name a Google. Well i found the following,

http://www.sandowplus.co.uk/Competition/Zass/zassintro.htm

very interesting read! I know you're always driving home the message about Isometrics, but i think this made the point even clearer!

(worth a read people)

cheers

Yep look at the physique on the man no ROIDS here these people new how to train and get strong the right way i have been encorporating lots of ISOS into my bending workouts this last 12 months thanks to the above man and as he proved i am doing the same weights aint everything

[gazza]

Today whilst at work the refuse wagon i work on developed a fault so we had to go back to the yard for a repair when we got there ayoung fitter asked me if i was the one who bent the stainless bar hanging up its a 5.5" x 5/16" stainless i bent for another fitter a while back anyway i said yes and we got talking about bending then i bent a screwdriver for him and snapped a good quality spanner then i got my bag and out came the 10mms x 7inch stainless yes the same ones that dunkster sent i have been carrying a piece around with me letting it mock me for awhile RESULT 10mins and 27secs and it went down ended up with about 30 people watching me as a good few people came over from the canteen when they heard me shreaming now a few of them want me to put on a sponsored bending thing for them for charity so its all good feel really sore now everything hurts even my toes

I will video the next one and aim to get it under 10mins still shit slow but its getting quicker.

[Booyah!!!]

Awesome Gazza!!!!

[dimmers]

Look forward to that vid Gazza!

I reckon with all this bending you've been doing of late, you're going to end up on the news or something! Charity bending, bending in swimming pools and out in fields!!! it's bound to get on TV at some point

Oh yeah, got my first batch of 1/4" stainless today and found it to be quite similar to the 1/4" crs except that the crush is great fun! I can see why you like stainless now, i may of been converted! although i can safely say i won't be buying any 5/16" stainless for quite some time as that must be brutal on the crush (i don't even want to think about that 10mm stainless either Gazza you crushing monster

Edited April 17, 2007 by youdimmers

[Tim71]

I told somebody else one time that it's only a matter of time before a news media will pick up on Gazza.

Man Gazza that might have been a good time to ask for a raise. Why can't I work with somebody cool like that?

Great Job man! You'll get it in under 5 minutes soon. Have you had Eric calibrate a piece yet?

Tim

[dunkster]

I knew you would destroy it! I bet it has been bugging you since your first go then when you have an audience it seems to help summon up a bit extra. Quality!

If anyone wants to calibrate it I'd be happy to send you a couple of pieces, just let me know.

[neilkaz]

I told somebody else one time that it's only a matter of time before a news media will pick up on Gazza.

Man Gazza that might have been a good time to ask for a raise. Why can't I work with somebody cool like that?

Great Job man! You'll get it in under 5 minutes soon. Have you had Eric calibrate a piece yet?

Tim

I agree...the media will pick up on him and he will become a strongman celeb in the UK !! A nice show of bending a few odd objects like railroad spikes and snapping screw drivers along with bending some 3/8" Stainless and bending 2 (at at the same time) of something like 1/4" or harder when a few random volunteers from the audience can barely kink it.

.. neilkaz ..

[mbcx6pmw]

Good stuff gazza, I'll look out for you on North West Tonight