Alawadhi Posted April 7, 2007 Posted April 7, 2007 Gazza did it again. He bent Huge King Of All Shiny Bastard. here are the links http://www.youtube.com/watch?v=U166TrTbmiI http://www.youtube.com/watch?v=dpZ7T7imq64 Congrats my friend Quote Read about me in my biography. Founder of Middle East and North Africa Grip Sports (MENA grip organization) "I made him an offer he couldn't refuse" ― Marlon Brando “We’re here to put a dent in the universe. Otherwise why else even be here?” ― Steve Jobs
Yersinia Posted April 7, 2007 Posted April 7, 2007 ur a maniac Gaz. maniac! . great bending!!1 Quote Goals! : Dominate the #2.5 and BBSM Done!
antarath Posted April 7, 2007 Posted April 7, 2007 I...am... speechless. CONGRATS!!!!!!!!!!! Quote Real name: Mats Erik Engelsvoll
Tfriend Posted April 7, 2007 Posted April 7, 2007 gazza copied my pump up routine between 4:30 and 4:42 of that video another legendary day for you man Quote
antarath Posted April 7, 2007 Posted April 7, 2007 I get the message "This is a private video. If you have been sent this video, please make sure you accept the sender's friend request" Please help Mats Quote Real name: Mats Erik Engelsvoll
neilkaz Posted April 7, 2007 Posted April 7, 2007 I get the message "This is a private video. If you have been sent this video, please make sure you accept the sender's friend request"Please help Mats Same here !! I want to see this awesome finish of this bend, which I suspect calibrates at over 1000 lb !! Simply awesome to say the least, Gazza !! .. neilkaz .. Quote
Alawadhi Posted April 7, 2007 Author Posted April 7, 2007 I can see the message now. Gazza must changed it or something. At least I am happy that I saw it before. Quote Read about me in my biography. Founder of Middle East and North Africa Grip Sports (MENA grip organization) "I made him an offer he couldn't refuse" ― Marlon Brando “We’re here to put a dent in the universe. Otherwise why else even be here?” ― Steve Jobs
Yersinia Posted April 7, 2007 Posted April 7, 2007 me 2 . hæhæ =p Quote Goals! : Dominate the #2.5 and BBSM Done!
gazza Posted April 7, 2007 Posted April 7, 2007 Quote "There he goes. One of gods own prototypes. A high powered mutant of some kind never ever considered for mass production.Too weird to live and too rare to die."
antarath Posted April 8, 2007 Posted April 8, 2007 ok..so...hmm..like.. w...h...e..r...e. can we see it? Yours Faithfully Mats Quote Real name: Mats Erik Engelsvoll
GatorGrip Posted April 8, 2007 Posted April 8, 2007 ok..so...hmm..like.. w...h...e..r...e. can we see it?Yours Faithfully Mats Everyone will have the opportunity to see this monumental effort on Easter Sunday as it will be posted on www.strongmanfeats.com take a look in the Gazza Strip section. Happy Easter and Remember He Is The Reason For The Season!!! Quote SOME OLD SOME NEW CHECK IT OUT! http://www.youtube.com/user/strongmanfeats
GatorGrip Posted April 8, 2007 Posted April 8, 2007 IT IS READY FOR YOUR AMAZEMENT www.strongmanfeats.com Click the GAZZA STRIP link, then Click WORLD RECORD BEND and HOLD ON TIGHT it is a WILD Ride! GATOR Quote SOME OLD SOME NEW CHECK IT OUT! http://www.youtube.com/user/strongmanfeats
Yersinia Posted April 8, 2007 Posted April 8, 2007 i'm surely amazed. no doubt about that. :rock :rock Quote Goals! : Dominate the #2.5 and BBSM Done!
antarath Posted April 9, 2007 Posted April 9, 2007 I can't watch it (crappy PC), but CONGRATS GARY!!! as amazing as it gets Quote Real name: Mats Erik Engelsvoll
EricMilfeld Posted April 9, 2007 Posted April 9, 2007 I'm unable to watch it, as well. It seems to get stuck in the "loading" mode. Was Gazza's ultra incredible bend finished within 5 minutes? Super website, Gator! Quote
neilkaz Posted April 9, 2007 Posted April 9, 2007 I'm unable to watch it, as well. It seems to get stuck in the "loading" mode.Was Gazza's ultra incredible bend finished within 5 minutes? Super website, Gator! Doesn't get out of loading mode or when u click loading again u get sent to You Tube and hung up in the private menu. Eric, I believe this 6" Stainless 3/8 would calibrate to over 1000 lb !! What do you think ? .. neilkaz ..in awe..absolutely in awe. Quote
EricMilfeld Posted April 9, 2007 Posted April 9, 2007 I'm unable to watch it, as well. It seems to get stuck in the "loading" mode.Was Gazza's ultra incredible bend finished within 5 minutes? Super website, Gator! Doesn't get out of loading mode or when u click loading again u get sent to You Tube and hung up in the private menu. Eric, I believe this 6" Stainless 3/8 would calibrate to over 1000 lb !! What do you think ? .. neilkaz ..in awe..absolutely in awe. Oh, absolutely! I'm thinking closer to 1,100 pounds. Quote
GatorGrip Posted April 9, 2007 Posted April 9, 2007 (edited) SORRY GUYS that is crazy it was working for me earlier but I will trouble shoot it until it loads for people. About that 1000lb plus yield strength that is just amazing but what is astounding is that he did like 5 super stainless bends including DU and Reverse stuff. His strength is incredible but his endurance is off the charts. I think it took like 6 or 7 minutes but like I said the guys was bending the toughest stuff back to back. If he was fresh I know he would knock it out less than 5 minutes. Edited April 9, 2007 by GatorGrip Quote SOME OLD SOME NEW CHECK IT OUT! http://www.youtube.com/user/strongmanfeats
antarath Posted April 9, 2007 Posted April 9, 2007 I can't watch it (crappy PC), but CONGRATS GARY!!! as amazing as it gets Didn't John Beatty say that there ain't no timelimit on the insane bastard and beyond? Hope so! Mats Quote Real name: Mats Erik Engelsvoll
gazza Posted April 9, 2007 Posted April 9, 2007 On this video of the Huge KOASB bend on Gators site you will not see me wrap the bar etc i do that on the video 4 of 5 on youtube so you need to watch that to see the opening and wrapping etc. The 4 videos on youtube plus the one on gators site 5 vids in all show 4 bends in total not 5 as Kel says and the 5 vids without the newspaper clippings i added are 48mins in all from when the video started rolling to after the Huge KOASB bends i did not want to pause stop the video at any time so just left it rolling as i wanted to capture everything in its entirety. Video 4 of 5 is me talking and preparing for the Huge KOASB bends i would have liked to have rested a minute or 2 longer but was mindfull of the ammount of video time it was useing my biceps forearms and fingers were cramping up quite bad on the Huge KOASB bends i think it was only the adrenalin and anger that got me to finish the bar. I should really have taken a crack at the Huge KOASB before the Big KOAB bar but mentally i let the Huge one get to me because even tho i have done these bends on my stock its always an unknown factor trying other stock . Pat in one of his best PR days i think it was either the Insane bastard day or when he put the Mag shiny and KOAB crs bars down said when you feel right you just have to go with it thats certainly true with me as well i was hyped up for a good few days pryor to the package arriving as i start really preparing for PR/tough bends days sometimes a week in advance really focusing on getting mean and nasty this i feel has been one of the major things i use to great effect and jureing my harder bends on the vids you can see all that internal anger/hate comeing out its working for me so i will continue to use it. Everybody knows that cut a bar down and the poundage goes up to bend it but to a certain exstent so does your leverage only on really short bends is that negated. This past 12mnths or so i have never been frightened by the poundage of a certain bar/steel etc after reading books by the mighty atom, lace armstrong and lots of articles on Kaz and others as well as looking into self hypnosis and other stuff i just now look at the bar as another piece of steel regardless of its strength and if it dont bend on the day then i aint strong enough on that day but there is always other days obviously thats not to say you can just go an take a 1/2"thick bar and DO bend it but one day who knows I have kinked harder stuff some 3/8"Stainless hex i have a piece with a near 5 pennies kink in it that i attack everynow and then it moves a 1/2-1 millimeter every so often but its a 7inch piece so is really hard on the kink this is the target for me as a mid/long term goal. I have some 10mms stainless round comeing soon and i do think i will be able to put a big hurtin on a 7inch piece its only 2 1000ths or something like that bigger than 3/8inch so i am optimistic Today 4 days after the best bending PR day of my bending career so far i feel sore Shouldes really hurt these have been taking longer to heel than normal and generally feel more sore each time but i suppose as the difficulty/poundage of the bars goes up its only natural it takes more out of you A bit of tendonitis in the left elbow and sore wrists ans fingers the DU style huge shiny bastard really hurt the wrists were they meet the thumbs might have to experiment with some DU style training to bring up that side of the wrists happy that the Reverse Huge shiny went as easy as it did definately more there its the 30secs time limit for this and DU style thats the problem with me as i have never been a fast/explosive bender on the kink/starts i more prefer to ease into the bar then hydrolically crush it i think blasting into the harder for me bars will finish my shoulders off Anyway back to the beginning of the this days bending TIM T sent me some stuff once again thanks TIM and asked me if there was anything in particular i wanted i knew john beatty was very busy and that TIM already had an order being put together for hom by john so it made sense for timto tack a few pieces on rather than me order and wait so i asked tim fopr some Huge shiny bastards and some 3/8" KOASB and a 7inch shiny bastard which i was gonna try and bend in a pair of handcuffs with a combo style of DU and Reverse just something really to amuse myself with I think tim forgot to get that one for me no probs asit was only gonna be a novelty bend anyway. Obviously the other stuff arrived and some other mean stuff a nice piece of 7/16inch round i might have a crack at when rested and some more 3/8inch drillrod down to 6inch that will be a nice bend to get as well and some 3/8inch crs in various lengths etc Need a good rest now then its back to business no "LIMITS" guys Quote "There he goes. One of gods own prototypes. A high powered mutant of some kind never ever considered for mass production.Too weird to live and too rare to die."
Pryderi Posted April 9, 2007 Posted April 9, 2007 Inspirational Gary. Looking forward to the final vid. Quote Danny
judoboy Posted April 9, 2007 Posted April 9, 2007 thanks again for more highly motivational stuff gazza. amazing! like gators site too Quote Regards, Anthony http://www.armageddonarmwrestling.com/ http://m.youtube.com/user/armageddonarm http://m.youtube.com/user/midlandsmilitia
ox3782 Posted April 9, 2007 Posted April 9, 2007 That was like watching a man change into a werewolf.That was awsome!!! Quote Brendan Dwyer | 6'1" | 204lbs | 7 7/8 inch hand
boland magyar Posted April 9, 2007 Posted April 9, 2007 gazza how come the video is not available. tried gators site and it said said its not available have you withdrawn it and why boland Quote
amaury Posted April 9, 2007 Posted April 9, 2007 Outworldly Wanted to watch it again. Got the same issue as Boland. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.