Jump to content

Rgc Ratings


MalachiMcMullen

Recommended Posts

Matt said that the 3.5 was REALLY creaky. It had not been used much and had never been oiled. It really changed, otherwise the numbers are pretty close, some higher, some lower.

I'm not surprised about the 7lb difference if it had never been oiled. I'm positive Bob would have reached 177 the way it was binding.

Link to comment
Share on other sites

Also, it is good to stress being meticulous about strap placement. Even tiny, barely noticeable differences will throw the ratings off a pound or two.

Too often, I believe I was letting the strap land at the edge of the bevel. I think this is where my BBE went down 3 pounds. That is a gripper I have always kept oiled pretty well.

Link to comment
Share on other sites

Matt said that the 3.5 was REALLY creaky. It had not been used much and had never been oiled. It really changed, otherwise the numbers are pretty close, some higher, some lower.

I'm not surprised about the 7lb difference if it had never been oiled. I'm positive Bob would have reached 177 the way it was binding.

I think I have only oiled grippers one time in a million years. I vaguely remember them feeling easier after they were. "Brand New" grippers do not need oiling, do they? Is that yet another variable that makes "certification" on #3s tough? I am curious if, when I get them back, they will feel easier to me.

Also, I guess at 170, that is an "easy 3.5", huh?

Hbgzr

Link to comment
Share on other sites

Matt said that the 3.5 was REALLY creaky. It had not been used much and had never been oiled. It really changed, otherwise the numbers are pretty close, some higher, some lower.

I'm not surprised about the 7lb difference if it had never been oiled. I'm positive Bob would have reached 177 the way it was binding.

I think I have only oiled grippers one time in a million years. I vaguely remember them feeling easier after they were. "Brand New" grippers do not need oiling, do they? Is that yet another variable that makes "certification" on #3s tough? I am curious if, when I get them back, they will feel easier to me.

Also, I guess at 170, that is an "easy 3.5", huh?

Hbgzr

You know whats funny? Strossen and Sorin both suggest oiling new grippers :laugh I only oiled mine once about a year ago and they haven't squeaked or creaked once despite heavy use so I wouldn't think it's necessary on a regular basis.

  • Like 1
Link to comment
Share on other sites

when calibrating grippers, do you place the strap at the end of the handle or at the end of the bevel.

Link to comment
Share on other sites

when calibrating grippers, do you place the strap at the end of the handle or at the end of the bevel.

End of the handle. You can easily feel with your finger and tell that it's flush.

Link to comment
Share on other sites

You know whats funny? Strossen and Sorin both suggest oiling new grippers :laugh I only oiled mine once about a year ago and they haven't squeaked or creaked once despite heavy use so I wouldn't think it's necessary on a regular basis.

I think it's necessary to oil new grippers. And I'm leaning towards spraying them quickly before each PR attempt. It takes one second and actually seems to matter. Our unintended experiment with Luke's grippers show this pretty clearly. He had several new grippers from IM and BB and they all dropped quite a bit once oiled. His #3 dropped 16 lbs. If you watch some of his Youtube closes of this gripper, you can hear it chatter and pop and bind all the way through the range of motion. I can't imagine getting a gripper in that condition for a cert!

Also, there is the case with my #3. I had oiled it frequently, but I can't say for sure how near any calibrations. It was not squeaking and never had squeaked. However, oiling it immediately before the calibration dropped 10 lbs from previously cross-calibrated numbers.

This has made me a believer that the only true test of a gripper's strength is to oil it immediately before an attempt. I believe any gripper will be harder to some degree otherwise (how much harder obviously depends on time passed and tons of environmental factors). We already knew this, though, but I personally wasn't paying it much attention. If you search for "mash monster" and look at the old threads, there is some pretty interesting stuff that leads up to the decision to oil and clean the MM grippers after every cert.

  • Like 1
Link to comment
Share on other sites

You know whats funny? Strossen and Sorin both suggest oiling new grippers :laugh I only oiled mine once about a year ago and they haven't squeaked or creaked once despite heavy use so I wouldn't think it's necessary on a regular basis.

I think it's necessary to oil new grippers. And I'm leaning towards spraying them quickly before each PR attempt. It takes one second and actually seems to matter. Our unintended experiment with Luke's grippers show this pretty clearly. He had several new grippers from IM and BB and they all dropped quite a bit once oiled. His #3 dropped 16 lbs. If you watch some of his Youtube closes of this gripper, you can hear it chatter and pop and bind all the way through the range of motion. I can't imagine getting a gripper in that condition for a cert!

Also, there is the case with my #3. I had oiled it frequently, but I can't say for sure how near any calibrations. It was not squeaking and never had squeaked. However, oiling it immediately before the calibration dropped 10 lbs from previously cross-calibrated numbers.

This has made me a believer that the only true test of a gripper's strength is to oil it immediately before an attempt. I believe any gripper will be harder to some degree otherwise (how much harder obviously depends on time passed and tons of environmental factors). We already knew this, though, but I personally wasn't paying it much attention. If you search for "mash monster" and look at the old threads, there is some pretty interesting stuff that leads up to the decision to oil and clean the MM grippers after every cert.

I agree with everything you said there Matt.

I'd also like to point out that many people do seem to think that the noises will act as an indicator whether to oil the gripper or not. It's not about the noises the gripper makes if left unoiled. Why wait the corrosion if you can prevent it? Oil your grippers regularly, they will stay in better condition and serve you well for longer time and the oil takes away one variable off your training. Then, it's up to you, not if the spring is oiled or not.

Edited by Teemu I
Link to comment
Share on other sites

  • 3 weeks later...

I received my RGC device from Chris Rice yesterday and I did some calibrating this morning.

GR8 #3 141.5 lbs

BBE 165.5 lbs

BBSE 179.3 lbs

COC 3.5 175.25 lbs

COC #4 203.5lbs

BBWC 268.25 lbs

I have more grippers but this is what I got done today looking forward to calibrating more.

Brendan

Link to comment
Share on other sites

I've compiled the data into an Excel spreadsheet. Why? Because I have this sickness dealing with quantifiable numbers. Very useful if anyone is interested. Problem is, since I don't have my website back (yet), I'm not sure how to get the info to you all. Any suggestions?

Bob Lipinski - Your PDA 190 measured 160??? That seems outrageous! Travis measured his 262 at 123, and Incindium's 280 measured 133. My PDA 343 is just under an IM #3, and lone wolf's 546 measured 155. Do you know how old it is? Mine is circa 2002 (approx).

Brendan, I'd like to get my grippers calibrated. Maybe we could hook up sometime? Pizza for the calibrater?

Thanks all, Alan

Link to comment
Share on other sites

Bob's 160 PDA190 is a pretty stout gripper. I thought the spring size was more along the lines of a #3 though. Not sure if the 190 number is actually a reference of anything...except for maybe a number that was stamped on the handle by PDA to identify it off the line somehow.

Link to comment
Share on other sites

I received my RGC device from Chris Rice yesterday and I did some calibrating this morning.

GR8 #3 141.5 lbs

Brendan

Wow, that is one of the easier #3's out there, especially with the new springs they have...

Link to comment
Share on other sites

I received my RGC device from Chris Rice yesterday and I did some calibrating this morning.

GR8 #3 141.5 lbs

Brendan

Wow, that is one of the easier #3's out there, especially with the new springs they have...

I noticed that as well...I'd like to give that #3 a try myself if we get together anytime soon.

Link to comment
Share on other sites

I received my RGC device from Chris Rice yesterday and I did some calibrating this morning.

GR8 #3 141.5 lbs

Brendan

Wow, that is one of the easier #3's out there, especially with the new springs they have...

Yes I was very suprised I rechecked it several times.

Link to comment
Share on other sites

I received my RGC device from Chris Rice yesterday and I did some calibrating this morning.

GR8 #3 141.5 lbs

Brendan

Wow, that is one of the easier #3's out there, especially with the new springs they have...

I noticed that as well...I'd like to give that #3 a try myself if we get together anytime soon.

No problem Matt

Link to comment
Share on other sites

I've had my hands on a grade 8 #3 that was easy as hell. The variation is still there.

Blasphemy! :D

Link to comment
Share on other sites

Yes I was very suprised I rechecked it several times.

Does it feel that easy? Like BBSM-ish?

No It does not feel that easy.

Also the 175 3.5 feels harder than the BBSE at 179 the spread on the 3.5 is 3" and the BBSE is 2.75" so I think that has a lot to do with the way it feels.

Link to comment
Share on other sites

  • 2 weeks later...

All grippers calibrated by Brendan and myself today-

BBSM---------132.75

Easy #3------143.75

Hard #3------151.5

RB300--------171.75

#4------------220.25

I'd like to know, does anyone have a #4 harder than mine? I know mine is an absolute beast. Most 4's I can at least set, but this one is just ridiculous.

Link to comment
Share on other sites

All grippers calibrated by Brendan and myself today-

BBSM---------132.75

Easy #3------143.75

Hard #3------151.5

RB300--------171.75

#4------------220.25

I'd like to know, does anyone have a #4 harder than mine? I know mine is an absolute beast. Most 4's I can at least set, but this one is just ridiculous.

Robert Alva (lonewolf) has a single stamp one that was 223.

Link to comment
Share on other sites

All grippers calibrated by Brendan and myself today-

BBSM---------132.75

Easy #3------143.75

Hard #3------151.5

RB300--------171.75

#4------------220.25

I'd like to know, does anyone have a #4 harder than mine? I know mine is an absolute beast. Most 4's I can at least set, but this one is just ridiculous.

Robert Alva (lonewolf) has a single stamp one that was 223.

Sicko #4's both yours Josh and Roberts.Woodall even looked at Joshes #4 crooked when we pulled it out at Championships.

Chad almost closed my #4 right before checking that beast out.

Edited by ox3782
Link to comment
Share on other sites

Big Nasty have a very hard #3 and #4. His #3 is 190 something and his #4 I think 260 something.

  • Like 1
Link to comment
Share on other sites

Big Nasty have a very hard #3 and #4. His #3 is 190 something and his #4 I think 260 something.

:blink

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy policies.